mc_tcu3: Enable graphic init code

Hardware / Coreboot - Werner Zeh [siemens.com] - 25 February 2016 08:16 UTC

The used Baytrail-M SoC on TCU3 tend to have issues with DisplayPort if the graphic power gate is not set up in coreboot. To avoid this error, use the graphic init code on this board.

Change-Id: I973bbaa7d86c1ede1f2884b3a08ccb31f7d85087

e0b3c7b mc_tcu3: Enable graphic init code
src/mainboard/siemens/mc_tcu3/Kconfig | 1 +
1 file changed, 1 insertion(+)

Upstream: review.coreboot.org

  • Share